What type of antenna is the non-articulated kit for the 350?

  • 2
  • Question
  • Updated 4 years ago
  • Answered
What type of antenna is the

AP350 non-articulated indoor wall antenna kit (3x2.4Ghz 2dBi and 3x5Ghz 2dBi antennas)?

Are they omni, semi, or directional? Do charts exist for these? I just came across them in the accessories list and they may work well for an upcoming deployment depending on their characteristics.

Photo of Steven Bateman

Steven Bateman

  • 65 Posts
  • 12 Reply Likes

Posted 5 years ago

  • 2
Photo of Mike Kouri

Mike Kouri, Official Rep

  • 1030 Posts
  • 271 Reply Likes
They are omnidirectional antennas, short and stubby fellows that don't have elbows so they stick straight out from the AP. I'll ask the hardware PLM responsible for th AP330/350 if he has any illustrations or charts for these.
Photo of Jason Hills

Jason Hills

  • 78 Posts
  • 3 Reply Likes
Wondered if anybody has a photo of the AP350 connectors.
I understand these are RP-SMA - female: ie with the centre pin and thread on the outside.

Just confused as the AP350 datasheet describes the ANT-KITs as RP-SMA FEMALE, when I suspect these are RP-SMA MALE - ie with an inside thread and centre hole.

Photo of Andrew Garcia

Andrew Garcia, Official Rep

  • 368 Posts
  • 120 Reply Likes
See this thread for photo of the AP350 connector.