VLAN not found on 2024 switch

  • 1
  • Question
  • Updated 4 years ago
  • Answered
  • (Edited)
I am rolling out a VoIP system into the school. I run 330 APs, mainly a HP Procurve switch environment, but I have one 2024 AeroHive switch. The data in the school runs on the default VLAN, the voice on VLAN 5. I have the switch trunked from one of the HP switches along with two of the 330 APs. If I run a VLAN Probe from the APs, they find the VLAN 5 and the phones can connected to the VoIP system. If I run the VLAN Probe from the swtich, I can not find the VLAN 5. The ports on the HP are configured the same for the APs and the switch. The network policy for the switch apperas as follows


Can anyone point me toward how to get the switch to be able to access the VLAN - and the phone connected to port 2 from there?
Photo of Ross Gailer

Ross Gailer

  • 2 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Gregor Vucajnk

Gregor Vucajnk, Official Rep

  • 74 Posts
  • 27 Reply Likes
Can you try from the CLI?

int mgt0 dhcp-probe vlan-range1 5 timeout 2

Gregor
Photo of Andrew MacTaggart

Andrew MacTaggart, Champ

  • 483 Posts
  • 86 Reply Likes
A few CLI commands I found helpful

Does the vlan exist on the switch

#show vlan brief

#show interface switchport

does the trunk actually have the vlans expected.

Is your mgt0 interface on vlan 1 and native vlan 1?

Cheers
A