Teacherview guide to config

  • 1
  • Question
  • Updated 4 years ago
  • Answered
Hello, we are looking a guide to made the config in the HMOL because reading the help (we have not find any other doc) we are not sure what do we need to configure it.
Photo of Adrian Perello

Adrian Perello

  • 13 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Scott M.

Scott M., Sr. Support Engineer

  • 104 Posts
  • 8 Reply Likes
Hello Adrian,

I suspect you are looking for a guide or manual to help configure a HiveManager On-line (HMOL) Virtual HiveManager (VHM).  

There's a good chance you can find what you're looking by following the link below and then navigating to "Technical Training" or "Tech Docs and Online Training."

http://www.aerohive.com/support/overview.html



:D

Photo of Joe Fraher

Joe Fraher, Official Rep

  • 30 Posts
  • 7 Reply Likes

The steps for configuring TeacherView within HiveManager are explained within the HiveManager Help. For example, if you are using HiveManager 6.1r5 or 6.1r6, this would be the URL for those instructions: http://www.aerohive.com/330000/docs/help/english/6.1r5/hm/full/help.htm#tv/guide.htm

One other thing: Before you can see the TeacherView settings, you must enable it, which you can do on the Home > Administration > HiveManager Services page. For Help about doing that, see http://www.aerohive.com/330000/docs/help/english/6.1r5/hm/full/help.htm#home/admin/services.htm

(Edited)