Switch dimensions

  • 1
  • Idea
  • Updated 3 years ago
Add the switch dimensions to the product spec overview for the Aerohive switches. Not all racks are created equal, and size apparently does matter.

Cheers
A
Photo of Andrew MacTaggart

Andrew MacTaggart, Champ

  • 483 Posts
  • 86 Reply Likes
  • arcane

Posted 4 years ago

  • 1
Photo of Joe Fraher

Joe Fraher, Official Rep

  • 30 Posts
  • 7 Reply Likes

Andrew's suggestion that this information be in the data sheets and product specs makes good sense. In the meantime, the dimensions for the different switches can be found in the 6.1r5 HiveManager Help:

SR2024 and SR2024P: http://www.aerohive.com/330000/docs/help/english/6.1r5/hm/full/help.htm#hw/sr/SR2024_2024P.htm

Chassis dimensions: 17.25” W x 1.75" H x 12.25” D (43.82 cm W x 4.45 cm H x 31.12 cm D)


SR2124P: http://www.aerohive.com/330000/docs/help/english/6.1r5/hm/full/help.htm#hw/sr/SR2124P.htm

Chassis dimensions: 17.25” W x 1.75" H x 15.25” D (43.82 cm W x 4.45 cm H x 38.74 cm D)


SR2148P: http://www.aerohive.com/330000/docs/help/english/6.1r5/hm/full/help.htm#hw/sr/SR2148P.htm

Chassis dimensions: 17.25” W x 1.75" H x 15.25” D (43.82 cm W x 4.45 cm H x 38.74 cm D)


Note that the width and height are the same for all four models, but the SR2024 and SR2024P are not as deep as the SR2124P and SR2148P.

Photo of BJ

BJ, Champ

  • 374 Posts
  • 45 Reply Likes
Bump, please post the physical dimensions of the SR series switches on the product pages.

Best,
BJ