Simple VPN Configuration between aerohive ap

  • 1
  • Question
  • Updated 3 years ago
I have some confusion with site to site VPN between access points. I am new to this technology so question may sound like stupid question, if so I apologies for that.

Scenario:

I have head office with AP 230 acting as following:

Radius server for wireless clients
DHCP server for Guest wireless clients

all access points in the office are in the same L2 VLAN with IP 192.168.22.0/24 and working fine.

Now I have to set up another branch in some other city.

New wireless management will be 192.168.122.0/24
Corporate traffic will drop on the local Data VLAN.

Both management ranges can ping to each other so there is routes between them..

I would like to set up a VPN between Aerohive Head office AP 230 which is DHCP server and Radius and Branch Access points.

I would like to use Head office access point as radius and Guest DHCP server for the branch.

I hae tried to confiure L2 VPN but I got confuse with Client pool range.. when I click on help I end up having more confusion.

so if there is a simple guide or way to get this going that will be awesome..

If someone can help me out..

I am using cloud base controller.

simple goal..

- Branch should have same experience as HO .. for guest and corporate.. and Guest should have same IP address as branch.
- Guest traffic should tunnel back to the HO AP so I don't have to route Guest traffic in the network.
-  All the Guest traffic regardless of the location should go via HO AP 230 for the routing and DHCP.
Photo of nilay vyas

nilay vyas

  • 6 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1

There are no replies.