PCI Compliance

  • 1
  • Question
  • Updated 5 years ago
  • Answered
I've got a friend who owns 17 restaurants (pizza franchise) and their PCI compliance is much easier if they only have their POS on the network. In some of the stores, they have DVR's and PC's acting as DVR's. Is there a way they could leverage a BR200 to segment the DVR/PC aspect where it wouldn't be considered on the same network?
Photo of Bradley Chambers

Bradley Chambers, Champ

  • 302 Posts
  • 53 Reply Likes

Posted 6 years ago

  • 1
Photo of Abby S

Abby S, Employee

  • 94 Posts
  • 47 Reply Likes
hi brad! absolutely! that's a standard use case. we also have the ability to configure different ssids using the two Ethernet ports on a 330/350 on separate subnets if desired. all in all - at least a couple ways to solve this. You should definitely have your friend give us a call! Have you seen the built in PCI report on Hivemanager? It will also help with PCI reporting - we go through each section of the PCI report and display what is in compliance or not.
Photo of Bradley Chambers

Bradley Chambers, Champ

  • 302 Posts
  • 53 Reply Likes
Thanks Abby! I'll ping Shane (RSM for my area) and coordinate a meeting. Thanks!!
Photo of Bradley Chambers

Bradley Chambers, Champ

  • 302 Posts
  • 53 Reply Likes
This deal went through and the PCI scans for the stores that have been deployed is passing with flying colors. Shane Moore and Jeff Haydel have been great to work with on this project. The PCI questionnaire was also a breeze thanks to the BR200. They've deployed 7 store and have 9 more to go.
Photo of Mike Kouri

Mike Kouri, Official Rep

  • 1030 Posts
  • 271 Reply Likes
Bradley,

Thank you very much for sharing this testimonial with the community!!