password recovery ap 330

  • 1
  • Question
  • Updated 4 years ago
  • Answered
is there a hard reset on the AP 330, or an interupt to load the wizard again on boot
Photo of dorp

dorp

  • 2 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Sam

Sam

  • 120 Posts
  • 31 Reply Likes
Official Response
Hi Dorp,

Yes, on the underside there is a hole to use a paperclip to reset the AP.

Reset Button
You can reset the device or restore the factory default settings using the reset button. Insert a paper clip or similar tool into the pinhole and press the reset button. To reboot the device, hold the button down for 5 seconds. To return the configuration to the factory default settings, hold it down for at least 10 seconds. After you release the button, the indicator light goes dark, and then glows steady amber while the firmware loads and the system performs a self-test. After the software finishes loading and the AP has connected to HiveManager, the status indicator glows steady white.