outdoor 1130 as a switch uplink

  • 1
  • Question
  • Updated 3 years ago
I've a remote building with 3 x AP230 and 1 x AP1130. All of them connected to a PoE switch. I'd like to make the outdoor AP 1130 UpLink for the switch and to feed the other three AP connected with signal. I tried several configurations but no luck so far. The only way to put the AP 1130 in mesh mode is to shutdown the link but then I can't feed the switch. So I am puzzled. Any help?
Photo of George Verrückt

George Verrückt

  • 3 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Mike Kouri

Mike Kouri, Official Rep

  • 1030 Posts
  • 271 Reply Likes
In HiveManager navigate to the Monitor tab, select your AP1130, click Modify. The look at the radio settings at the top of that panel. You'll need to pick one of the mesh settings as well as the checkbox for bridging ethernet devices. The online help should help you further.