Are there manuals containing all procedure configurations possible in an AP?

  • 1
  • Question
  • Updated 5 years ago
  • Answered
  • (Edited)
Hi

Where can I see manuals or guides where I can see all procedures configuration possible in AP??
Photo of Diego Armando Romero Monsalve

Diego Armando Romero Monsalve

  • 28 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 1
Photo of Mike Kouri

Mike Kouri, Official Rep

  • 1030 Posts
  • 271 Reply Likes
Photo of Raúl Tejeda Calero

Raúl Tejeda Calero

  • 8 Posts
  • 3 Reply Likes
Hi,

You can check the "help page" of HiveManager: Help > HiveManagerHelp.

After that you can download the guide or/and to look for the procedures availables in order to configure the APs.

Regards
Photo of Crowdie

Crowdie, Champ

  • 972 Posts
  • 272 Reply Likes
If you are wanting to learn the CLI commands for an Aerohive access point I recommend you:

1. Configure an access point using HiveManager
2. SSH into the access point
3. Issue a "show run" command to see the running configuration
4. Work through the running configuration matching each section of CLI commands to the HiveManager configuration

It becomes very obvious how the CLI commands work together to provide the required functionality and if you want to complete low level fault finding you will have to use the CLI.
Photo of Diego Armando Romero Monsalve

Diego Armando Romero Monsalve

  • 28 Posts
  • 0 Reply Likes
thanks to all
Photo of David Coleman

David Coleman, Official Rep

  • 209 Posts
  • 164 Reply Likes
The best link is always: http://www.aerohive.com/techdocs

As mentioned in previous responses, the best resource is the outstaning HELP file which you can download from that URL.