How do I assign a guest Wifi vLAN across multiple sites?

  • 1
  • Question
  • Updated 3 years ago
I currently have 2 SSIDs: GUEST and SECURE across 3 sites. Both SSIDs use the default subnet at the sites they are connected to. I want to move the GUEST access to a separate vLAN. This is would be straight forward if they SSID was only available at my main site and I have already configured the backhaul connections as trunk ports.

My problem is the 2 other sites are small satellite sites have flat networks.
New Post
Can I? 

A: Use GRE so that the GUEST clients at the satellite sites will use the same subnet as GUEST at my main site and be routed.

B: Have some way of keeping the default subnet at my Satellite sites.

I do not want to have to have different guest SSIDs at each sites.

Thanks in advance

Steve
Photo of Steve

Steve

  • 2 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Bob Reisdorf

Bob Reisdorf

  • 3 Posts
  • 3 Reply Likes
Steve, by using Radio Tags and firewall rules you could accomplish what you are wanting to do. Each site would get guest vlan from assigned radio tag. Firewall rules will prevent guests from accessing corp resources
Photo of Steve

Steve

  • 2 Posts
  • 0 Reply Likes
Thank you. I already have the firewall rules in place for GUEST access, I can figure out that I need to put the Tags in Device classification, but I cannot work out how to force a vLAN/subnet based upon the tag/location?