get count of APs within HiveManager

  • 1
  • Question
  • Updated 11 months ago
How do I total count of APs within HiveManager?  And break down of active, inactive APs as well?  thanks...
Photo of Ben Jacob

Ben Jacob

  • 1 Post
  • 0 Reply Likes

Posted 11 months ago

  • 1
Photo of Crowdie

Crowdie, Champ

  • 960 Posts
  • 269 Reply Likes
In HiveManager:
  • Click on the "Dashboard" menu (top of screen)
  • Click on the "Network Summary" tab
  • The "Current Client and Device Status (Network Wide)" widget has the following information - new devices, devices with alarms, devices with outdated configurations, devices connected to HiveManager and devices disconnected from HiveManager.
In HiveManager NG:
  • Click on the "Dashboard" menu (top of screen)
  • Click on the "Summary" tab (normally selected by default)
  • Click on the "Connection Status" area to expand it
  • The number of access points/switches currently connected to HiveManager NG and the total number of access points/switches managed by HiveManager NG will be displayed.  The number of offline access points/switches will, obviously, be the difference.
Photo of Bill W.

Bill W.

  • 222 Posts
  • 35 Reply Likes
On caveat to using the Dashboard as Crowdie suggests. If you have other Aerohive devices (switches, routers, vpn gateways), then they will show up in the count. So if you have other devices and just want APs, you need to go to the Monitor->Devices->All Devices->Access Points->Aerohive APs or Configuration->Devices->Aerohive APs and then the total number will be shown in the upper right side of the screen next to the Edit Table button. This is for HiveManager Classic. I'm not sure about NG.