Creating a L3 IPSce tunnel between BR200 and AP330

  • 1
  • Question
  • Updated 3 years ago
I would like to create a L3 VPN tunnel between BR200 and AP330.
Is there any documents for it?
Can someone help me to do it?
Photo of Tommy Byoung Jun Kang

Tommy Byoung Jun Kang

  • 4 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Bill W.

Bill W.

  • 222 Posts
  • 35 Reply Likes
As I stated in your other post, you need a CVG (now called HiveOS VA). BR200 and AP330 can only initiate and not respond.
Photo of Roberto Minotti

Roberto Minotti, Employee

  • 51 Posts
  • 5 Reply Likes
Bill, both AP330 and 350 can terminate up to 128 tunnel in L2 mode.
Roberto
Photo of Tommy Byoung Jun Kang

Tommy Byoung Jun Kang

  • 4 Posts
  • 0 Reply Likes
Thank you for your quick reply.
How about Layer 2 VPN?
Is it possible between BR200 and AP330?
Photo of Roberto Minotti

Roberto Minotti, Employee

  • 51 Posts
  • 5 Reply Likes
Tommy, you can't mix different type of VPN with router and AP. You need HiveOS VA for L2/L3. If you can change BR200WP with BR100, then you are able to set it in AP mode (in order to establish VPN L2 between a router in AP-Client mode and AP330 in L2-Server mode).

HTH 
Photo of Tommy Byoung Jun Kang

Tommy Byoung Jun Kang

  • 4 Posts
  • 0 Reply Likes
Thanks Robert.
I have a BR200-LTE-VZ.
Is it support AP mode? Because I cannot see a AP mode on Device Function.
There is only "Router".
Photo of Roberto Minotti

Roberto Minotti, Employee

  • 51 Posts
  • 5 Reply Likes
Tommy, the only BR model that support the AP-mode is BR100 (for VPN-L2). If you want to build a VPN-L3 between BR200 and AP330/AP350, you need to assign a router role for the AP330/AP350 under Device Template settings of your Network Policy (with Routing flag enabled)
ciao
(Edited)