CP Users Authentication in NG

  • 1
  • Question
  • Updated 10 months ago
Hello, i tried to configure a Guest SSID that is open and use CP with local User Authentication. If i enable "Authentication with HiveManager NG Authentication Service" than i see after typing username and password "Authentication is not initialized. We use HiveManager as an on prem Version. By using AP as Radius Server it works. So is "Authentication with HiveManager NG Authentication Service" only supported on Cloud?
Regards
Photo of Neo

Neo

  • 16 Posts
  • 0 Reply Likes

Posted 1 year ago

  • 1
Photo of Juan Dominguez

Juan Dominguez

  • 9 Posts
  • 0 Reply Likes
Hi,

I have the same question, somebody could answer that ?

Thank you in advance

Joan
Photo of Nick Lowe

Nick Lowe, Official Rep

  • 2491 Posts
  • 451 Reply Likes
Hi Juan,

The VA (on-prem) version of HMNG does have a built-in authentication service. Have you tried it with the 11.21 release?

Thanks,

Nick
(Edited)
Photo of Juan Dominguez

Juan Dominguez

  • 9 Posts
  • 0 Reply Likes
Hi Nick,

We have the 11.21.0.1 VA (on-prem) version of HMNG. We create a SERVICE / RADIUS group to enjoy the account expiration capbilities and activate the Authentication with HiveManager NG Authentication Service. We also need a CWP , and we configured for the user login. I think that our problem is in the configuration of the CWP. When we create a user on that group and try to login on the CWP, ever fails the login. 

We have no problems with SSID's with a SERVICE/RADIUS and NO CWP to login.

We miss some configuration on the cwp? 

Thank you in advance

Joan