country code setting of ap

  • 1
  • Question
  • Updated 3 years ago
  • Answered
country code setting on ap230 is set to 56 (Belgium) and 826 (UK) of the ap's deployed (8 aps, one with cc 56). How can i change this so that all ap's have the same country code ?
Photo of Nico

Nico

  • 2 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Manoah Coenraad

Manoah Coenraad, Champ

  • 72 Posts
  • 67 Reply Likes
Hello Nico,

You can change the country code here:

Monitor -> Select AP -> Update -> advanced -> Update country code

(Edited)
Photo of Nico

Nico

  • 2 Posts
  • 0 Reply Likes
Thx, was indeed able to change it in above location.
Photo of Matthew Metcalfe

Matthew Metcalfe

  • 2 Posts
  • 0 Reply Likes
I've got a couple set to the UK and cannot set them to the US because they are set for "World" and cannot be set to FCC. Any idea on how to get that done?
Photo of Andrew Garcia

Andrew Garcia, Official Rep

  • 368 Posts
  • 120 Reply Likes
Matthew, if you have mistakenly been sent World mode APs when you ordered FCC units, you should contact your Aerohive support representative to get swap them out for the correct units.
Photo of Matthew Metcalfe

Matthew Metcalfe

  • 2 Posts
  • 0 Reply Likes
Thanks. We never use anything but FCC units. Two of them are in production already. Guess we'll swap them out.
Photo of Andrew Garcia

Andrew Garcia, Official Rep

  • 368 Posts
  • 120 Reply Likes
Yeah, you definitely want to get those out of commission and replaced ASAP.