Can BR100 or BR200 dial PPPOE using VLAN interface instead of physical interface?

  • 1
  • Question
  • Updated 4 years ago
  • Answered
Can BR100 or BR200 dial PPPOE using VLAN interface instead of physical interface?
Photo of Radzi Kamarudin

Radzi Kamarudin

  • 1 Post
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Brian Ambler

Brian Ambler

  • 245 Posts
  • 126 Reply Likes
Hi Radzi,

Unfortunately the PPPoE configuration must be bound to the Eth0 interface. More from the HiveManager help system can be found here under "Interface and Network Settings":
  • Connection Type: For the Eth0 WAN interface, select the type of connection from the drop-down list as DHCP, Static IP, or PPPoE.
  • This option is not available when the router is configured to behave as an AP.
  • Select DHCP if you want HiveManager to provide an IP address for the Eth0 WAN interface connection.
  • Select Static IP if you want to enter a static IP address, netmask, and default gateway for the Eth0 WAN interface connection.
  • Select PPPoE if you want to establish a point-to-point Ethernet connection, which is required for many cable and DSL ISP Internet connections, and then select a PPPoE Authentication Profile from the drop-down list. You can modify an existing profile or create a new profile by clicking one of the icons to the right of the drop-down list. For more information about PPPoE Authentication Profiles, see the Help for PPPoE Authentication. When PPPoE is enabled, the router will direct the user to a captive web portal where the user must enter a user name and password provided by the ISP.
Additional information regarding how to configure PPPoE configuration can be found here