BR200-WP CLI help

  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hello, with a BR200-WP using OS 5.1r1a is there a port forwarding CLI command that can be entered? I have a few applications/services going across the network that comes in on specific ports and I'm needing to forward all trafic on those pots to specific computers. (again, CLI not through the hivemanager gui please.)
Photo of David

David

  • 3 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Andrew Garcia

Andrew Garcia, Official Rep

  • 368 Posts
  • 120 Reply Likes
I don't recall that the BR supported port forwarding in 5.X code.  I believe it was added sometime after 6.0.
Photo of Andrew Garcia

Andrew Garcia, Official Rep

  • 368 Posts
  • 120 Reply Likes
If you can get yourself upgraded, the latest CLI reference guide for the BR200 is here.
Photo of David

David

  • 3 Posts
  • 0 Reply Likes
Hey Andrew, I have upgraded the OS and I should have everything pretty well set I believe, I'm not sure what exactly I'm missing. Any chance you could give me a quick step by step? its a basic port forward i'm trying to do so all incoming traffic on set ports would go to a set IP.