BR100 Corporate Internet Access

  • 1
  • Question
  • Updated 5 years ago
  • Answered
I have configured a BR100 at home and it is connected to the HiveOS within my corporation
On the client side are two SSIDs, one for Corporate connection (internal VLAN20) and one setup for Guest (Guest VLAN10)
All wired ports on the BR100 are set for VLAN20 only
I can connect to both the Guest and Corp VLANs and get all my corporate traffic and internet as well as just the internet for the guest.
The issue is that the corporate internet drops straight off the BR100 and uses the local internet. I want to just allow the guest users the local internet traffic and pass all the corporate traffic through the IPSec.
Have applied a routing policy but this dosn't seem to work
Any ideas would be great
Photo of Shane

Shane

  • 19 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 1
Photo of Andrew MacTaggart

Andrew MacTaggart, Champ

  • 483 Posts
  • 86 Reply Likes
Sounds like split tunnel is what you seek

maybe this link will help

http://www.aerohive.com/330000/docs/h...
Photo of Shane

Shane

  • 19 Posts
  • 0 Reply Likes
cheers for that,
I had the routing policy in place under split-tunnel however have now changed to custom and added the rules per user-profile,
will test tonight
Photo of Shane

Shane

  • 19 Posts
  • 0 Reply Likes
All worked using custom rules against user profiles.
Thanks for the help