Auto Provisioning via 3g

  • 1
  • Question
  • Updated 5 years ago
  • Answered
Is it possible to use auto provisioning on a BR200 via 3g modem, or does it need to boot via the WAN port first?
The idea was that the BR200 should be running in small offices only via 3g and that I shouldn't have to open the boxen befor sending them out.
Photo of Erik Gunnarsson

Erik Gunnarsson

  • 38 Posts
  • 6 Reply Likes

Posted 5 years ago

  • 1
Photo of Andrew Garcia

Andrew Garcia, Official Rep

  • 368 Posts
  • 120 Reply Likes
As long as there is 3G/4G coverage where the BR200 lives, this should work fine. The BRs have built in logic that will fail over the WAN connection to the USB adapter if there is no link detected on the ETH0/WAN port.