AP250 and HMOL6.8r5

  • 1
  • Question
  • Updated 2 years ago
I got another question regarding AP 250 and Hive Manager 6.8r5. When I try to upgrade from 7.0r1 to 7.0r2, I got

an errror occurred when executing the following CLI command save image scp://*****@ no prompt_password ***

Then Aerohive device was unable to upgrade image to flash memory because there is not enough memory in the device or there is error occued during the file transfer process 

When I update my config and after reboot, I got
An error when executing the following CLI command: save signature-file scp://****------/signature/ap230_all_plugins_4x.tar.gz no-prompt_password *****
unknoknw error encountered during signature update.

Why show ap230_all_pluginsAP230 ? my device is AP250?

is any issue between AP250 and HMOL 6.8r5
Photo of bin yu

bin yu

  • 26 Posts
  • 2 Reply Likes

Posted 2 years ago

  • 1
Photo of Brian Powers

Brian Powers, Champ

  • 396 Posts
  • 92 Reply Likes
Most likely this is related to a content filter restricting access from your LAN to your HMOL over the needed ports (UDP 12222 and TCP 22).  What type of content filter do you use?