AP230, clients connect to wifi0.2 with connection type wired

  • 1
  • Question
  • Updated 3 years ago
  • (Edited)
We have an office with 2 x AP230 but one is showing 30 total users but 25 of these appear to be unconnected and show as connected to wifi0.2 and show as being wired.
Why are they are able to connect to wifi0.2 via a wired method?

I have attached a screenshot
Photo of Dominic Russell

Dominic Russell

  • 10 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of mdparker04

mdparker04

  • 11 Posts
  • 4 Reply Likes
If you modify the configuration of the ap in question, is the check box that states something to the effect, bridge wired client, checked? It shoul be just below the the radio button dealing with how the radio is used, as access or mesh. Uncheck the box dealing with bridging. Save and update the AP.
Photo of Dominic Russell

Dominic Russell

  • 10 Posts
  • 0 Reply Likes
Hi mdparker04, thanks for the response
I have found the option "Enable the bridging of Ethernet-connected devices over the wireless mesh network" but this is not ticked on either of the APs.

I should have stated that the devices are all running HiveOS 6.4r1a.2103 via HiveManager on premises