AP230 High CPU Usage

  • 1
  • Question
  • Updated 12 months ago
Hi all,

This is my first post in the community and I am a newbie with Aerohive AP's. I work at a school and we have several AP's all around the building and all of them don't go over 15% of CPU usage. But there is one in particular that is always above 70%, we restart it but it does not seem to work. It is running HiveOS 7.1r1 build-142326.

I would like some help to resolve this issue because the AP sometimes goes down randomly due to this. I believe this is the only AP running 7.1r1 though, all the other ones have 6.5r5. Do you guys think that is the issue? Or is it just bad hardware?

Thanks in advance guys.
Photo of TJ


  • 5 Posts
  • 0 Reply Likes

Posted 12 months ago

  • 1
Photo of Jay


  • 18 Posts
  • 4 Reply Likes
Yes, I am with a school district also and I have around 1900 and I have seen high CPU usage on them with that code.  I brought them back to 6.5r5 and just moved up to 6.5r6 and they are working fine. 
Photo of Metka Dragos

Metka Dragos

  • 51 Posts
  • 11 Reply Likes
would you please work with Aerohive support on this issue?Thank you