AP in my house

  • 1
  • Question
  • Updated 6 months ago
When i'm in my livingroom I have an AP130  connect to a POE switch this one is working fine ,but how do i make sure that the accespoints upstairs ( AP230 ) and at the attic (AP120) are in the same connection ?
And how can i connect without a cable the one i want to put in my shed (AP120)
Photo of Meijndert Wijmans

Meijndert Wijmans

  • 4 Posts
  • 0 Reply Likes

Posted 6 months ago

  • 1
Photo of BJ

BJ, Champ

  • 374 Posts
  • 45 Reply Likes
Here is the answer to you shed question...
http://docs.aerohive.com/330000/docs/guides/AerohiveMeshDeploymentGuide.pdf

You could use a PoE injector to power the AP without a switch, if you have power in the shed. 

I'm not sure I understand the question regarding the AP230 & 120. If you're wondering if they are seeing each other wirelessly, you can run the "show acsp neighbor" command from the cli. 
Photo of Doug

Doug

  • 14 Posts
  • 0 Reply Likes
That would do the trick using a PoE Injector to power the AP in the shed.
Photo of Meijndert Wijmans

Meijndert Wijmans

  • 4 Posts
  • 0 Reply Likes
Thnx  , in the house is everything working fine but in the shed i don't have any connections other then 220v power , no network nothing.