AP Config Commands

  • 1
  • Question
  • Updated 1 year ago


Does anyone know the CLI Commands for the following, from under Monitor > Select AP > Modify :

Device Classification (to put no tags)
Radio Profile, which is not in the picture but it's for the wireless, 2.4 and 5
Hostname (Which I believe is just 'hostname "hostname" '

These are less necessary, but would be helpful:
Topology Map
Location 

Thanks
Photo of Hunter Hearne

Hunter Hearne

  • 19 Posts
  • 0 Reply Likes

Posted 1 year ago

  • 1
Photo of Crowdie

Crowdie, Champ

  • 972 Posts
  • 272 Reply Likes
The device classification (tags) and topology map information are not stored on the access points.

The location can be located in access point via the snmp command:

snmp location "Access Point Location"

The radio profile consists of a number of CLI commands.  You can see these through an SSH connection to a configured access point.

You are correct on the hostname command.
Photo of Hunter Hearne

Hunter Hearne

  • 19 Posts
  • 0 Reply Likes
Awesome, Thank you so much!
Photo of Hunter Hearne

Hunter Hearne

  • 19 Posts
  • 0 Reply Likes
Also, the radio profiles are already configured. I just want to set them to each wireless. I believe I found the command;
interface "interface name" radio profile "profile name"
Please correct me if I am wrong there.