AP 230 Management vlan L3 interface on the Core switch but user define vlan gateway on firewall

  • 1
  • Question
  • Updated 12 months ago
Photo of Anil Singh

Anil Singh

  • 12 Posts
  • 0 Reply Likes

Posted 12 months ago

  • 1
Photo of Anil Singh

Anil Singh

  • 12 Posts
  • 0 Reply Likes

Hello Team,

I have management vlan on the core switch but user vlan gateway on the firewall..


Do I need to open any port for the communication between firewall and AP management interface for guest web portal page. to be open automatically..


Kindly advise..


We have NG Portal.

Thanks & Regards
Anil Singh

Photo of Anil Singh

Anil Singh

  • 12 Posts
  • 0 Reply Likes

All necessary port which is required for the communication when firewall is there in the customer network and as per Aerohive standard is already opened..


this question is specific for this scenario.

Best Regards

Anil Singh

Photo of Eastman Rivai

Eastman Rivai, Official Rep

  • 146 Posts
  • 17 Reply Likes
Anil,

When an Aerohive AP sees an http traffic the traffic will be directed to the AP's internal virtual interface where the CWP sits on. It  has not nothing to do with the management interface. A dedicated VLAN should be assigned for the Guest SSID and it needs to be able to reach the internet.

Common protocols that are needed:

DHCP, DNS, HTTP and HTTPs.

Eastman