Aerohive AP Light Indicator

  • 1
  • Question
  • Updated 3 years ago
  • (Edited)
What are the differentiation between Green,Purple and Orange light indicator at Aerohive AP ?

As i understand,

Green- AP managed to get the internet connection with no CAPWAP protocol. The AP unable to find their hiveManager. We must configure the AP to make sure they do have the internet connection.

Orange- Capwap connection are not established.AP have no internet connectivity.

White ?

Purple ?

Thanks for helping.....
Photo of Azfar Nazari Zainudin

Azfar Nazari Zainudin

  • 5 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Joe Fraher

Joe Fraher, Official Rep

  • 30 Posts
  • 7 Reply Likes
On the AP110, AP120, AP330, and AP350, the status LED colors indicate the following states:

Dark: There is no power or the status indicator is disabled. 

Blue (solid): The device is booting up or there is no backhaul link; (flashing) the device is shutting down. 

Green: The default router is through the backhaul Ethernet interface, but not all conditions for normal operations (white) have been met. 

Yellow: The default route is through a backhaul Wi-Fi interface, but not all conditions for normal operations (white) have been met. 

White: The device is powered on and the firmware is operating normally; that is, the AP has made a CAPWAP connection to HiveManager.

Purple: A new image is being loaded from HiveManager. 

Orange: An alarm indicating the firmware or hardware issue has occurred.