Add an option to view the allocation tbale of the DHCP server.

  • 1
  • Question
  • Updated 5 years ago
  • Answered
It would be nice if I could bring up an allocation table for a DHCP server running on a HiveAP.
Photo of Jornt Weyts

Jornt Weyts

  • 26 Posts
  • 3 Reply Likes

Posted 5 years ago

  • 1
Photo of Brian Ambler

Brian Ambler

  • 245 Posts
  • 126 Reply Likes
Hi Jornt,

If you are looking to view the DHCP Allocation Table it can be seen from both HiveManager and the CLI on the HiveAP DHCP server.

From HiveManager:


From the CLI of the HiveAP DHCP Server:
labap5#sho l3 int
Name IP Address Mode VLAN MAC State
----------- --------------- -------- ------ -------------- -----
Mgt0 10.200.1.85 - 1 0019:77XX:XXXX U
Mgt0.4 10.200.42.254 - 42 0019:77XX:XXXX U

labap5#sho int mgt0.4 dhcp-server
DHCP server parameters on interface mgt0.4 (VLAN 42).
DHCP server: enabled
Authoritative-flag: enabled
Arp-check: enabled
Lease time: 86400 secs
Netmask: 255.255.255.0
Default gateway: 10.200.42.1
NAT support: disabled
DNS Server: 10.200.1.21 10.200.1.25
NTP Server:
WINS Server:
Domain name: domain.net
IP pools:
10.200.42.100 - 10.200.42.199

labap5#sho int mgt0.4 dhcp-server detail
LPR: Lease Period Remaining

No. MAC address IP address LPR
---- ---------------- ---------------- ------------------
1 xxxx:xxxx:xxxx 10.200.42.103 22 hr 58 min 34 sec
2 xxxx:xxxx:xxxx 10.200.42.101 23 hr 28 min 15 sec
3 xxxx:xxxx:xxxx 10.200.42.102 23 hr 23 min 59 sec
4 xxxx:xxxx:xxxx 10.200.42.100 21 hr 59 min 49 sec

Hope this helps.
Photo of Jornt Weyts

Jornt Weyts

  • 26 Posts
  • 3 Reply Likes
That is exactly what I was looking for. I can't believe I missed it.
Thanks Brian.