Add New AP to Comunicate With Radius Server

  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi All, 

I have issue here 

Recently , I have 10 unit AP in my network, 2 unit as AP act Radius server, The extra 8 unit AP is communicate with the 2 unit Radius 

Right now, I have add extra 5 unit AP to my network, How can configure this extra 5 AP to communicate with the RADIUS AP 


Thanks 
Photo of Lim Yih How

Lim Yih How

  • 2 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Eastman Rivai

Eastman Rivai, Official Rep

  • 146 Posts
  • 17 Reply Likes
All you need to do is to push the same network policy to these new AP.
If you specified NAS clients and shared secret manually on the Aerohive AAA Server Settings you will need to add the IP addresses for these new APs. Please use the same secret as the existing one. 

If you did not specify any NAS and shared secret earlier, you don't need to modify the Aerohive AAA Server Settings.
Photo of Jackywong

Jackywong

  • 13 Posts
  • 0 Reply Likes
Support
Photo of Lim Yih How

Lim Yih How

  • 2 Posts
  • 0 Reply Likes
Hi all ,

Thanks for all the help, finally the issue is solve , the problem is on the radius server ap, I found that the radius server is not responding.

After perform reboot on the radius server ap, all the new ap is now able talk with radius.

Thanks